Installation
14 TankControl
01
1.
Open the control unit.
2.
Mount the control unit to the wall.
B 1
Mount the screw to the wall.
2
Hang the bottom part to the screw.
A
Drill the fastening holes in the bot-
tom part with a Ø 5 mm drill.
Mount the bottom part to the wall
with the screws shipped with the
unit.
3
Fixate the bottom part by screwing the
lug to the wall.
3.
Mount the junction box at the required location to connect the
cable of the submersible probe and the control unit.
4.
Route the cable of the control unit into the junction box.
5.
Push the screw connector (screw connector kit or mounting kit,
refer to chapter 6.4, page 18) onto the cable of the submersible
probe; ensure proper orientation.