Afore Anybuild Series, User Manual

Page: 16 / 40

15
Assembly Instructions:
◆
Prepare the DC wire to connect the positive and negative DC arrays. Stripping length is 12
～
15mm
，
sectional area is 4 mm
2
as below.
◆
Insert the DC wire to metal connecting tube. Make sure all line heads are in the connecting tube as
picture blow.
◆
Use crimping pliers to fasten the meatal connecting tube and copper wire. Make sure the harness will
not fall off, see picture below.
Female Connector
Male Connector
Stripping length is 12~15mm, sectional area is 4mm
2
Negative PV Array
Positive PV Array