AFLAMO Fort BB, Owner'S Manual

Page: 6 / 24

6
E
B
B
B
B
B
D
E
A
A
E
B
B
STEP 4. Take off the wall bracket from the
back of fireplace box and store the screws
as you will need to screw back. Align the
holes in the wall bracket (E) with the pilot
holes and drywall anchors. Thread wood
screws (B) through washers and holes in
the wall bracket, then directly into the wall
studs and/or drywall anchors.
Make sure bracket is level. Tighten all
screws securely with ascrew driver.
B
.
ALWAYS unplug this fireplace heater before assembly or cleaning, or before
relocating. Failure to do so could result in electric shock , fire , or personal
injury
.
( A )
( B )
STEP 5. A.
With the help of a capable adult, lift the fireplace (A) and align the hooks on the back of
the fireplace with the slots on the wall bracket. Carefully set the hooks intothe slots.
B
. Secure the fireplace to the wall bracket with two ST 5x10 metal screws, one on each side.
Thread the screws through the fireplace and into the wall bracket side tabs. Tighten both screws
with a Phillips screwdriver. The unit may now be plugged in.
www.aflamo.pl/en/