32
Note:
Starting with the wet cleaning and finishing in the dry improves cleaning action, reduces
static buildup, and finishes with the end-face dry.
Cleaning the adapters
Method 1:
1. Insert a Cletop adapter cleaning stick into the sleeve of the adapter and rotate 10 times.
2. Remove.
3. After cleaning the adapter, replace the adapter over the ferrule; centering it onto the alignment pin.
4. Tighten the adapter base.
Method 2:
1. Use a can of filtered compressed air (held vertically), blow out any contaminates from the adapter.
2. After cleaning the adapter, replace the adapter over the ferrule; centering it onto the alignment pin.
3. Tighten the adapter base.
Recharging Batteries
You may charge the batteries while the OFL280 is switched on or off by attaching an AC power
adapter.
• Plug the AC adapter/charger into a standard wall outlet.
• Connect the AC adapter/charger to the Power port located on the OFL280 side panel.
• The [AC/Charger] indicator on the side panel will turn on - Red.
• Charge batteries until the [AC/Charger] indicator turns Green.
Repair and Calibration
AFL suggests that NOYES test equipment be calibrated every 12 months by an authorized NOYES
calibration facility.
Annual calibration ensures that you are getting the most out of your equipment and that it is
performing accurately. Many test standards also require annual calibration.
Authorized NOYES calibration facilities are ISO 9001 certified, traceable to the National Institute of
Standards and Technology, and in compliance with ANSI/NCSL Z540-1, ISO 10012-1, ISO 17025.
USA Repair and Calibration services
Please contact NOYES customer service for a return authorization number prior to sending your NOYES
test equipment in for repair or calibration.
NOYES Test and Inspection Division
16 Eastgate Park Road
Belmont, NH 03220
603-528-7780
800-321-5298