manualshive.com logo in svg

AFL FlexTester 3, Quick Reference Manual, Page: 3 / 18

Share
Download
AFL FlexTester 3 Quick Reference Manual Download Page 3

3

FLX380 FlexTester

3

 Test Modes

OTDR Modes

TEST MODE

NETWORK BEING TESTED APPLICATIONS

SETUP

FTTx PON OTDR – 
Test Customer 
Fiber Only (to 
splitter)

PON power meter.

Customer fiber fault location (fiber may be 
live or dark).

Auto

FTTx PON OTDR – 
Test Through 
Splitter

End-to-end length, loss, and ORL. 
Splitter loss.  
Feeder fiber fault location.

Semi-Auto

Full Auto (point-
to-point)

Long-haul 

Metro 

Access

Fault location.
End-to-end length, loss, and ORL.
Connector loss and reflection.
Splice loss.

Auto

Real Time

Any

Short range fault location.
First connector check.
Fusion splice check.
Mechanical splice tuning.

Semi-Auto

Expert

Any

Advanced point-to-point and FTTx PON. 
testing for experienced OTDR users.

Manual or  
Semi-auto

PON

OLT

PON

Light Source and Power Meter Mode

TEST MODE

APPLICATION

Light Source

• 

Measure end-to-end loss using manually set or Wave ID wavelength.

• 

Trace fibers using tone generation and a NOYES Optical Fiber Identifier (OFI).

Power Meter

• 

Measure optical power or fiber loss using manually set or automatically detected 
(Wave ID) wavelength.

Summary of Contents for FlexTester 3



















Reviews:

No comments