YES
tablet
7380 User’s Guide September 16, 2003
Gateway). In addition, you may have to specify additional “
WINS
” or “
DNS
” in “
Name
Servers
”. Then click on “
OK
” at the top of the window for confirmation.
vii) Now, you may need to set up a user name, password and Domain. Click “
Identification
” in
Network Configuration window, input your “
Name
”, “
Password
” and “
Domain
”.
Windows CE uses the information to identify your right to access the network. Then click
“
OK
” at the top of the window for confirmation.
c) Stylus Setup and Calibration
i) Double-click
“
Stylus
”; the Stylus Properties window will appear.
ii) To test the “
Double-Tap
” function; follow the instructions to double click the two squares
at the right of the Window. If it is correct, then click on “
OK
” at the top of the window for
confirmation.
iii) If you want to recalibrate or your device is not responding properly to your taps, select
“
Calibration”
and
follow the instruction to recalibrate. When you are done, click on “
OK
”
to continue.
d) System Properties Set Up
i) Click on “
System
”; the System Properties window will appear.
ii) Click on “
General
”; the System information will be displayed. Then click on “
OK
” at the
top of the window for confirmation.
iii) Click on “
Memory
”; you can adjust the allocation of unused RAM to run programs or for
storage (by moving the arrow to right or left). After changes, click on “
OK
” at the top of
the window for confirmation.
iv) The System Properties Set Up procedure is completed.
Note
: This feature may not be persistent over power cycles.
e) System Software Update
i)
Click on “
Update
”; the Update window will appear.
ii)
Provide appropriate information in the blank fields, click “
Update
”, and the device will be
updated with specified software from the specified FTP server automatically. Follow any
displayed instructions. After finishing with the loading process, click on “
OK
” at the top of
the window for confirmation
f) Operational
Tips
i) Sometimes an application window may cover the Task Bar. You can recover it by keying
Alt+Tab
.
CAUTION for “Update” Function
To avoid system crashes and irrecoverable states, you must:
•
Use AC power instead of Battery power when the device software is being updated.
•
NOT turn the system OFF when the device software is being updated.
NOTE:
It is advisable that you
restart
the device
before
performing the Update function, or
at
least close
all opened applications.
5