background image

Label  Qty. 

Description 

Part Number

A1 

Air Filter (Pro 5R) 

R23-91129

A2 

Air Filter (Pro DRY S) 

R21-90098

B 1 Housing 

05-52001B2

C 1 Tube 

05-52001B1

D 1 Grommet 

03-50033

E  1 Cap 

03-50103

Clamp, #064 

03-50006

Coupling, Silicone Hump  05-01332

Seal Trim (18") 

05-00072

Clamp, #072 

03-50010

Clamp, #080 

03-50011

Coupling, Silicone Bellow  05-01457

Installation will require the following tools:

8mm Nut driver and Phillips #2 screwdriver.

• Please read the entire instruction manual before proceeding.
• Ensure all components listed are present.
• If you are missing any of the components, call customer support at 951-493-7100 

   or e-mail at [email protected].
• Ensure you have all necessary tools before proceeding.
• Do not attempt to work on your vehicle when the engine is hot.
• Disconnect the negative battery terminal before proceeding.
• Retain factory parts for future use.

Page 2

Note: Legal in California for use on race vehicles only. The use of this device on vehicles used on public streets or high-

ways is strictly prohibited in California and others states that have adopted California

emission regulations.

Summary of Contents for Quantum 53-10001D





















Reviews: