![background image](http://html.mh-extra.com/html/afe-power/magnum-force-54-13035d/magnum-force-54-13035d_instruction-manual_2864084006.webp)
®
Refer to Figure C for Steps 8-9
Step 8: Carefully pull up and remove the trim seal on top of the factory intake scoop, along with 1-2 clips
on either side. This helps with removing the factory airbox and installation of the aFe POWER
housing. 7
Note: It may help to use a panel popper when pulling the clips.
Step 9: Pull the factory intake tube off the throttle body and pull up to remove the entire factory intake.
Figure C
Page 6
7
REMOVAL