THIS IS A HIGH-PERFORMANCE PRODUCT:
Do not use this product until you have carefully read the following agreement and installation instruction.
This sets forth the terms and conditions for the use of this product. The installation of this product indicates
that the BUYER has read and understands this agreement and accepts its terms and conditions.
DISCLAIMER OF WARRANTY AND LIMITATION OF LIABILITY:
Advanced FLOW Engineering, Inc. (also known as aFe or aFe POWER) and its successors, distributors, jobbers,
and dealers (hereafter “SELLER”) shall in no way be responsible for the product’s improper use and service. It
is the installer’s responsibility to check for proper installation and if in doubt, contact the manufacturer. The
SELLER assumes no liability regarding the improper installation or misapplication of its products. BUYER
acknowledges it has had the opportunity to fully inspect the product. Accordingly, BUYER acknowledges that
the product is being sold in “AS IS/WHERE IS” condition. SELLER shall not be held liable for special, indirect,
incidental or consequential damages of any nature with respect to the products (including, without
limitation, lost profits, lost sales, loss of production, property damage, personal injury or loss or damage
resulting from interruption or failure in operation of the products) and BUYER hereby expressly waives and
disclaims all such liability claims. The BUYER acknowledges and agrees that the disclaimer of liability
contained herein is a material term of the sale of the product and, to the fullest extent permitted by law,
BUYER shall defend, indemnify and hold SELLER harmless from any and all claims, demands, causes of action,
controversies, liabilities, fines, losses, costs and expenses (including, but not limited to attorneys’ fees, expert
witness expenses and litigation expenses) arising from or related to SELLER’s products.
Before proceeding with the installation:
• Please read the entire instruction manual before proceeding.
• Ensure all components listed are present.
• If you are missing any of the components, call customer support at 951
-493-7100.
• Do not attempt to work on your vehicle when the engine is hot.
Emission Disclaimer:
This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered
with the California Department of Motor Vehicles.
Disclaimer
Page 2
