![background image](http://html.mh-extra.com/html/afe-power/77-83028/77-83028_instruction-manual_2864077008.webp)
Step 8: Locate and disconnect the fuel pressure sensor connector, by pressing down on the locking tab
and sliding the connector out of the sensor.
Step 9: Locate the section of the aFe POWER harness labeled “Fuel”.” Plug the female connector of the
aFe POWER harness into the fuel pressure sensor, then take the male connector of the module
and connect to the female connector of the engine harness.
®
Page 8
Refer to Figure E for Steps 8-9.
Figure E
INSTALL