Afag Electric Slide ES12, Translation Of The Original Operating Manual

Page: 34 / 48

34 ES8-ES12-BA vers. 1.3 en. 20190311
4 Maintenance
4.1 After commissioning
• Check bolts for tightness
• Clean the guides using a slightly oily cloth
4.2 Every 3 months
ES8 and ES12, depending on the ambient conditions
•
ES8 and ES12 are greased with UH1 14-31
CAUTION
Only the grease specified may be used for lubrication of the lin-
ear motor axes.
CAUTION
If the device makes abnormal movements during normal opera-
tion, e.g. hard banging, the causes should be immediately rem-
edied.
The service and maintenance intervals must be observed. The intervals are based on a
normal environment. The approval of Afag Automation AG must be obtained in advance
if the devices are to be operated in an environment with abrasive dusts or with corrosive
or aggressive vapours, gases or liquids.