Afag CR 12, Translation Of The Original Montage Instructions

Page: 19 / 50

CR 12 - CR 16 - CR 20 - BA-vers.4.0 gb 20190630 19
3.1.1 Symbols
Assembly and initial start-up must be carried out by qualified personnel only and
according to these instructions.
CAUTION
Indicates a possibly dangerous situation.
Non-compliance with this information can result in damage to
property or light to medium personal injuries.
NOTE
Indicates general notes, useful operator tips and operating
recommendations which don't affect safety and health of the
personnel.
3.1.2 General description
This is an incomplete machine
The series of the CR 12 / CR 16 / CR 20 Rotary module is used for the linear, smooth
movement of rigidly mounted loads under the ambient and Installation conditions
defined, see Technical data.
The CR 12 / CR 16 / CR 20 Rotary module can be installed in the horizontal or
vertical position.
Modifications on the CR 12 / CR 16 / CR 20 Rotary module that are not described in
these Montage Instructions or have not been approved in writing by Afag Automation
AG are not permitted. In case of improper changes or assembly, installation,
operation, maintenance or repairs, Afag Automation AG rejects all liability.