Installation, assembly & setting
22 – 52
Assembly instructions EN
SA-1 I SA-1-FL
Edition 01/2021
Rev. 3.5
6 Installation, assembly & setting
The system operator is responsible for the installation of the telescope spindle
axis in a system!
6.1 Safety Instructions for Installation & Assembly
The telescope spindle axis is an incomplete machine.
For safe operation, the telescope spindle axes must be integrated into the safety
concept of the system in which they are installed.
During normal operation, it must be ensured that the user cannot interfere with
the working area of the telescope spindle axis.
When integrating a telescope spindle axis into an assembly system, the
customer must provided an appropriate enclosure or safety barrier.
No liability for damages can be assumed for damages caused by improper
installation/assembling work on the part of the operator.
Also observe the safety instructions in
Chapter 2 „Safety instructions“ in
this manual.
CAUTION
Risk of injury when installing the telescope spindle axis in a system!
Improperly performed work can lead to injuries and damage to property.
The installation may only be carried out by a qualified specialist!
CAUTION
Risk of injuries due to uncontrolled parts movements!
When the control system is switched on, the telescope spindle axis can make
unpredictable movements and cause injury or damage to property.
The telescope spindle axis may only be installed in a system when the
controller is switched off and secured.
Cables may only be disconnected or connected when the controller is
switched off!