Installation, assembly & setting
40 – 64
Assembly instructions EN
CS 16 - CS 20
Date 01.06.2021
Version 6.0
Query sensors
Proximity switches and initiators are not included in the scope of delivery (see
accessories). Only use the specified proximity switches and initiators!
Fixable proximity switches are used for end position sensing of the modules.
If the LED does not change its switching state during the end position sensing,
the proximity switch is incorrectly set or defective and must be reset or
replaced (
Chapter 8.3 Troubleshooting). In addition, the ring magnet may
be missing or defective.
In combination with magnetic field producing modules, interference may
occur when using the magnetic sensors.
Accessories:
Mounting kit:
Inductive initiator CS 16 - CS 20 Order no. No. 50242140
