Installation, assembly & setting
34 – 52
Assembly instructions EN
LM 12 I LM 16
Edition 11/2020
Rev. 2.5
6.4.1 Mounting of the proximity switch 6.5 mm
Fig. 14
Mounting of the proximity switch 6.5 mm
For mounting the 6.5 mm proximity switch proceed as follows:
1. Screw the proximity switch holder (Fig. 14, 1) on the stop screw.
2. Insert the proximity switch (Fig. 14, 2) into the holder up to the stop.
3. Tighten the proximity switch holder (Fig. 14, 1) slightly.
4. Fit the plug (Fig. 14, 4).
5. Perform a function check.
The proximity switch 6.5 mm is mounted.
6.4.2 Mounting of the proximity switch 8x8 mm
Fig. 15
Mounting of the proximity switch 8x8 mm
For mounting the 8x8 mm proximity switch proceed as follows:
1. Screw the proximity switch (Fig. 15, 5) to the holder (7) with screws (6).
2. Push the holder (7) with the proximity switch on the stop screw (Fig. 15, 8)
up to the stop.
3. Tighten with screw (Fig. 15, 9).
4. Fit the plug (Fig. 15, 4).
5. Perform a function check.
The proximity switch 8x8 mm is mounted.