Safety instructions
Assembly Instructions EN
LM 12 I LM 16
Edition 11/2020
Rev. 2.5
11–52
2.4.3 Obligations of the personnel
All personnel working with the linear modules are required to:
read and observe these assembly instructions, especially the chapter on
safety,
observe the occupational safety and accident prevention regulations,
observe all safety and warning signs on the linear modules,
refrain from any activity that might compromise safety and health.
In addition, the personnel must wear the personal protective equipment
required for carrying out their work (
Chapter 2.6
2.5 Personnel requirements
2.5.1 Personnel qualification
The activities described in the assembly instructions require specific requisites
at the level of professional qualifications of the personnel.
Personnel not having the required qualification will not be able to assess the
risks that may arise from the use of the linear modules thus exposing himself
and others to the risk of serious injury. Therefore, only qualified personnel may
be permitted to carry out the described activities on the linear modules.
Persons whose ability to react is restricted due to the intake of medication or the
like must not interact with the linear module.
These installation instructions are intended for skilled personnel (installers,
system integrators, maintenance personnel, technicians), electricians and
operating personnel.
The following is a description of the professional skills (qualifications) required
for carrying out the different activities:
Qualified personnel:
Qualified personnel with appropriate training who are qualified due to their
special know-how and fully familiar with the machine and who have been given
instructions on how to carry out the task entrusted to them safely.
Operator (trained personnel):
Authorized persons who due to their specialized professional training,
expertise and experience are capable of identifying risks and preventing
possible hazards arising from the use of the machine.
