5
4
Remove the Shower Pipe (4).
Place Mounting Face Plate (6) on wall
and use Pencil T-11 (
) to
Not included
mark center screw holes on wall.
CAUTION:
Before marking holes,
apply duct or masking tape over the
surface area of the tile where the hole
is to be drilled. This helps to prevent
the drill bit from slipping when starting
to drill the hole.
Place tip of the drill bit (1/4") against
the mounting hole mark on the wall or
the masking tape. Drive the drill bit
through each mounting hole mark.
CAUTION:
Do not drill into
a water line!
4
2
1
6
1
/
4
”
(
7
mm
)
13
14
15
15
Insert Screw Anchors (7). And gently
tap anchors into hole with Hammer
T-14 (
).
Not included
Use Philips Screwdriver T-10
(
) to gently secure bracket
Not included
to wall with 2 screws (8).
6
8
T-10
×
2
7
T-14
16
17
18
Press the button and take out the
Hand Shower Holder (5) from Shower
Pipe (4).
Summary of Contents for AFLZ01C
Page 3: ...3 AFLZ01C ...
