3
2
1
15
T-7
2
1
15
min 3/8
"
T-1
2
1
15
INSTALLATION
Option 2
Permanent Installation
（
Drilling
required
）
2
3
1/2"
T-2
5
6
4
13
Shower wall surface
Remove the existing showerhead arm
by turning it in a counter clockwise
direction.
Note:
A channel lock wrench T-12
(
) may be required.
Not included
Seal the wall around the elbow using
Silicon Sealant T-7 (
).
Not included
CAUTION:
Failure to seal the wall
may result in water damage.
T-12
1
Measure
the
distance
between
the
3/4”-14
NPT
(
National Pipe Thread)
in wall water supply elbow
(
not
included
)
and the nished
wall
surface.
If measurement is between 1-3/4" to
2-3/4" then use supply adapter (2).
If distance is between 3/8" to 1-3/4"
then use supply adapter (1). If distance
is less than 3/8" choose supply adapter (15).
Wrap 1 (one) layer of Plumber’s Tape
T-1(Included) on the threaded side of
the Supply Adapter (1) or (2) or (15).
Connect the Supply Adapter (1) or (2)
or (15) and turn clockwise with
1/2" Allen Wrench T-2 (
).
Included
Insert one end of Shower Arm (3) into
Supply Adaptor (1) or (2) or (15).
Summary of Contents for AFLZ01C
Page 3: ...3 AFLZ01C ...
