Please keep this user manual for future use. It
will expire upon publication of a revised issue
however, so please check when using this manual
if you have the latest available version.
You can check with your distributor, dealer,
AF-X Systems BV or on the website:
www.af-x.com
User Manual AF-X Fireblocker Nano Series version 3.5
27
7.2.
Conditions for safe storage
Technical measures:
Store in a dry and cool, well ventilated place away from
sources of heat, ignition and direct sunlight.
Storage conditions:
Store in a dry, preferably in the original storage/transport
packaging. Substance is hygroscopic.
Storage temperature:
between
-
20°C and 50°C, ideally 20°C
Heat and ignition sources:
Keep substance away from: ignition sources. heat sources.
Prohibitions on mixed storage:
Keep substances away from: strong bases, oxidizing
agents, combustible materials, organic materials.
Storage area:
Avoid unnecessarily exposure to air to prevent absorption of
moisture. Meet the legal requirements. Keep out of direct
sunlight. No open flames, no sparks, and no smoking.
Special rules on packaging:
Meet the legal requirements. Keep packaging closed when
not in use. Do not store in unlabeled containers.
7.3.
Specific end use(s)
Consult the identified uses in the User Manual of this product.
SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION
8.1. Control parameters (most critical National and International limits)
Not applicable.
8.2.
Exposure controls
8.2.1. Appropriate engineering controls:
Good general ventilation should be sufficient to control worker exposure to airborne contaminants.
Ensure that eyewash stations and safety showers are close to the workstation.
Handle in
accordance with good industrial hygiene and safety practice.
Wash hands before breaks and at
the end of workday.
8.2.2. Personal protective equipment
:
Hand protection
:
In case of repeated or prolonged contact wear
gloves (tested to EN 374). Take advice to gloves'
supplier.
The selected protective gloves have to
satisfy the specifications of EU Directive 89/686/EEC
Material selection gloves
:
Good resistance gives: rubber, butyl rubber, natural
rubber, neoprene. Nitrile rubber (NBR). Permeation
time: minimum >480min long term exposure;
material / thickness [mm]: Nitrile rubber (NBR) /
0,11 mm. Take advice to gloves' supplier.
