Please keep this user manual for future use. It
will expire upon publication of a revised issue
however, so please check when using this manual
if you have the latest available version.
You can check with your distributor, dealer,
AF-X Systems BV or on the website:
www.af-x.com
User Manual AF-X Fireblocker Nano Series version 3.5
25
5.2.
Special hazards arising from the substance or mixture inside the aerosol
generating fire extinguisher
Fire hazard:
When ignited, fire-fighting extinguishant will be developed. The white aerosol cloud developed, may be
confused with smoke but is actually the fire-extinguishing agent. The self-ignition temperature of the
material is around 350 ºC.
Explosion hazard:
No direct explosion hazard in vicinity of product in powder and tablet form. The self-ignition
temperature of the material is around 350 ºC.
5.3.
Advice for firefighters
Precautionary measures:
Exposure to fire/heat: keep upwind, consider evacuation and have neighborhood close doors
and windows.
Firefighting instructions:
Cool packages/tanks or loose product with water spray from safe distance (min. 5 Meters), and if
possible remove them into safety. Do not move the load if already exposed to excessive heat.
Exercise caution when fighting any chemical fire.
Protection during firefighting:
Do not breathe fumes. Fire-fighters should wear appropriate protective equipment and
self-contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode.
Clothing for fire-fighters (including helmets, protective boots and gloves) conforming to European
standard EN 469 will provide a basic level of protection for chemical incidents.
Other information:
Avoid mechanical shocks.
Avoid high temperatures.
Use water spray to cool unopened packages.
SECTION 6: ACCIDENTAL RELEASE MEASURES
Accidental release measures are presented when a generator has not ignited. Only by inappropriate
handling the content of the device can be released.
6.1.
Personal precautions, protective equipment and emergency procedures
General measures:
Always ensure your own safety first. Ensure adequate air ventilation.
Avoid contact with skin, clothing and eyes. Avoid raising dust.
Ensure a low relative humidity in the room. As the extinguishing particles are microscopically small,
they might attract moist. Create a corrosion stop to protect sensitive electronical equipment if
present. Also see ‘Methods for cleaning up’ under 6.3.
