You need to switch ON all loads (Head
Lights, Radio, Air-condition, Heater, etc)
and press enter key will display as
follow:
After that press
ENTER
key again and it
show as below:
4.9
Press
ENTER
key will show the
results of the test:
4.10
If either minimum or maximum
charging volts are not within the
voltage range limits then it will
display one of the screen as below
(Fig. 3 & Fig. 4) and it will prompt you
to check the alternator system for the
fault.
Fig. 3
Fig. 4
4.11
To exit the program, pressing the
EXIT
key at any moment will exit and return back
to the main menu screen.
5.
HELP KEY
Selecting this key will help you familiarize
with the analyser by explaining the various
functions and the results. To access to this
function, just press the
HELP
key during the
wakeup display:
Use the Up or Down key to scroll to the next
item. To exit this function, just press the
EXIT
key will return back to the main menu display.
Rev engine up to
2,000 rpm and
hold for 10 sec
Then press Enter
2000 RPM
Max 13.96 < 13.5 V
Min 13.76 > 12.5 V
Enter to proceed
13.89 V
ChrgVolts: 13. 96V
Result: Good
LOAD TEST
Min Charge: 12. 0V
Result: LOW
Check Alt System
LOAD TEST
Max Charge: 13. 06V
Result: LOW
Check Alt System
LOAD TEST
How to operate
▼
RESULTS
VOLTAGE
CCA
