Battery Electrical System
Analyser BESA 11
For testing all 12V automotive starting
batteries rated in CCA, DIN, IEC, JIS# and
EN. Also for testing vehicle Electrical
System.
Quick Start Guide
Product Specification:
Operating Voltage: 9V ~ 15V DC (max)
Analysing Capacity: CCA: 100 ~ 1700
IEC: 100 ~ 1700
JIS#: 100 ~ 1700
EN: 100 ~ 1000
DIN: 100 ~ 1000
Battery analysing time: Less than 5 seconds
1.
BATTERY TEST
1.1
Connect the tester clamps to the
battery posts, red to the positive (+)
terminal and black to the negative (-)
terminal. Rock each clamp back and
forth for better contact.
1.2
Once the display lighted up, it will
prompt you with instructions to
proceed with the test. Follow the
instructions and if it ask you to select
the rating system: CCA, DIN, EN,
JIS#, IEC; select the one according
to the battery rating. If you cannot
find its rating then select Unknown.
1.3
It will run through a self-test and
when completed it displays the Main
Menu as shown below:
New: Clear Memory
•
Clear the last tested results stored
in its memory
Continue Test…
•
Continue the last test on the same
car from where you had stopped.
Last Test Result
•
Review the test results of the last
tested car.
1.4
After you have made your choice,
selecting “New: Clear Memory” or
“Continue Test…” press
ENTER
will
proceed to the display below:
1.5
Pressing
ENTER
will proceed to
Battery Test as shown below.
BATTERY
ELECTRICAL
SYSTEM ANALYSER
BESA 11
New: Clear Memory
Last Test Result
Select Test
Continue Test . . .
Grounding Test
Starter Test
Alternator Test
Battery Test . . .
