AETNAGROUP ROBOPAC STARBOX 50 Use And Maintenance Manual Download

Page: 50 / 54

- 46 -

English

Chapter 9

SPArE PArTS rEPLACEMENT INforMATIoN

9.2.

replacinG the chain fOr mOVinG

the flap-clOSinG SheetS

Proceed as indicated.
1. Deactivate the main pneumatic cut-off switch to stop the machine

safely.

2. Dismantle the fixed protections

(d)

3. Unscrew the nuts

(q)

to loosen chains

(r)

completely.

4. remove the chain links

(t)

and remove chains

(r)

5. Install the new chains and lock them with the chain links.
6. Adjust chain tension (See 5.3. “Adjusting the chain for moving the

flap-closing sheets”).

restart the machine and check that it functions correctly.

caution

Warning

Before re-starting the machine, check that no tools or other

equipment has been left near the moving parts.

Summary of Contents for ROBOPAC STARBOX 50























































Search results

Summary of Contents for ROBOPAC STARBOX 50

Reviews:

Related manuals for ROBOPAC STARBOX 50

Brands by name

Popular brands

AETNAGROUP ROBOPAC STARBOX 50, Use And Maintenance Manual

Search results

Summary of Contents for ROBOPAC STARBOX 50

Reviews:

Related manuals for ROBOPAC STARBOX 50

Brands by name

Popular brands