background image

Hello!

 

 

Congratulations on your new custom handcrafted modern mailbox!  Hopefully 
everything delivered has met or exceeded your expectations, but please do not 

hesitate to contact us if this is not the case.  We want you to be happy!   
 

If everything is correct please refer to the basic installation guide below as well as 
some maintenance tips to keep your new mailbox looking beautiful.   

 
Thanks again! 

Mailbox

 

Post

 

Instructions

 

 

Included:  
 

1 – Mailbox Post 

 

1 – Hardware kits for mailbox attachment: 4 washers and 4 nuts 

 

Needed: 
 

Gloves for protection  

 

Post Hole diggers 

 

Short‐handle Phillips head screwdriver 

 

Wrench or Pliers 

 

Level 

 

Quick Setting Concrete (60 lb bag) 

 

Access to water (approx 5 gal.) 

Installing

 

the

 

Post

 

 

1.

 

In your desired location, dig a hole roughly 12” round by 16” deep.   Place the 

post into the hole making sure it is properly oriented so that the blank face of 
the 6” x 6” post is facing the same direction the mailbox will face. If you have 

purchased a 3” round post, make sure to orient the shortest edge of the post 
mounting bracket in the same direction the mailbox will face. 

2.

 

With post in the hole, pour dry mix Quickset concrete around the post to fill 
the hole ½ way full while keeping the post as level as possible. 

3.

 

Fill the hole with water.  We recommend using a stick or rod to poke the 
concrete mix to help it settle and allow the water to penetrate.   

Reviews: