Hello!
Congratulations on your new custom handcrafted modern mailbox! Hopefully
everything delivered has met or exceeded your expectations, but please do not
hesitate to contact us if this is not the case. We want you to be happy!
If everything is correct please refer to the basic installation guide below as well as
some maintenance tips to keep your new mailbox looking beautiful.
Thanks again!
Mailbox
Post
Instructions
Included:
1 – Mailbox Post
1 – Hardware kits for mailbox attachment: 4 washers and 4 nuts
Needed:
Gloves for protection
Post Hole diggers
Short‐handle Phillips head screwdriver
Wrench or Pliers
Level
Quick Setting Concrete (60 lb bag)
Access to water (approx 5 gal.)
Installing
the
Post
1.
In your desired location, dig a hole roughly 12” round by 16” deep. Place the
post into the hole making sure it is properly oriented so that the blank face of
the 6” x 6” post is facing the same direction the mailbox will face. If you have
purchased a 3” round post, make sure to orient the shortest edge of the post
mounting bracket in the same direction the mailbox will face.
2.
With post in the hole, pour dry mix Quickset concrete around the post to fill
the hole ½ way full while keeping the post as level as possible.
3.
Fill the hole with water. We recommend using a stick or rod to poke the
concrete mix to help it settle and allow the water to penetrate.
