P a g e
|
21
Note: Check reception, gate status and stored number features on this app do not work with this
model of intercom.
iPhone App Setup
On iPhone the user is also required to enter button labels, the intercom phone number and the
default message strings to perform the latch and unlatch functions. To do this, press the label
button shown below.
Note: For site security, it is recommended that only the building
manager has the ability to latch open the gates. Only the master
passcode (default 123456) will allow the latch open SMS text string to
work. If it is required for other users to have this feature, the text strings
for hold open can be copied from above SMS section and entered into
the app settings screen.
However care must be taken when using this feature. If a user latches
open the gate, only they will know this has been done. This could
cause a situation where other users think there is some problem with
the gate and call the engineer.
Trigger Gates
Hold
Open
Unhold
/ Close
Press to Enter Information
Use this to enter the phone
number of the intercom,
and other information
needed to operate the
intercom.
Latch Relay Button
Press to setup label and
button names
Trigger Relay Button
Un-Latch Relay Button
NEXT>
Press to go to Relay 2
controls.
Status features
Enter new screen to
check signal strength,
stored numbers, gate or
door status.