15
Trial running
After connecting water to the pool system, complete with a suitable by-pass and electrical connections by a
qualified electrician.
Be sure that:
1)
Appliance is horizontal and on a firm base.
2)
Water circuit is well connected (no leaks)
3)
Electrical circuit is well connected (all cables tightened correctly at terminals and intermediate circuit
breaker), insulated and earthed correctly.
4)
The installation requirements described previously are strictly adhered to.
ATTENTION: THE HEAT PUMP ONLY FUNCTIONS WHEN WATER FLOW IS PRESENT.
Then you can start up the heat pump following every point in the below order:
-
Open by-pass valves
-
Start pool system pump
-
Turn on pool heat pump
-
Set regulation
OPERATING THE UNIT
Operating the unit comes down to operating the digital controller.
ALWAYS ENSURE CONTROLLER IS DRY TO TOUCH.
NEVER PRESS THE BUTTONS OF THE DIGITAL CONTROLLER WITH A HARD, POINTED OBJECT.
THIS MAY DAMAGE THE DIGITAL CONTROLLER.
NEVER REMOVE OR SERVICE THE DIGITAL CONTROLLER YOURSELF, ASK A QUALIFIED SERVICE
PERSON TO DO THIS.
Summary of Contents for EFI 14
