P a g e
|
23
Automatic Triggering Times
Status
This feature is for automatic gate systems which are
not in automatic closing mode, and are in step-by-
step mode. I.e. When triggered they open and stay
open until triggered again. You can use this feature
to automatically trigger gates to perhaps open every
morning at a pre-set time, or close every night at a
pre-set time.
Tip: Up to 4 auto-trigger events per day can be
stored.
Check stored
numbers
– Will send
SMS reply with O for
dial out numbers and
I for dial in (caller ID
access numbers).
Check last 20 users
who triggered gates,
including keypad
codes used, with date
and time.
Check signal strength
on your intercom.
Level 1-31. Must be
above 14 for
successful operation.
Check the state of
both relays (ON or
OFF). ON = latched
open state. Check
status of gate limit
switch (if fitted).
