P a g e
|
13
Notification Number
This feature will send a SMS notification to a master user phone number every time the intercom
is used to grant access. It will send a SMS any time a relay is activated.
To use this feature firstly turn the function on:
9999
#
80
2
# (change
2
to
1
to disable again).
Now you must store the phone number which is to receive the notification:
9999
#
78
number
#
Now you may store a customised SMS content, which will be sent to the stored number:
9999
#
79
enter any text here
#
For example, you may wish to store the following message “My Gates Triggered”, or “Gates
Opened”.
Complete list of parameters
The table below show the complete list of features.
Programming messages below must begin
with 9999# (assuming 9999 is still the programming passcode)…
Changing pass codes
01????#
Change programming password
9999
02????#
Change access control password (SMS control of relays, or non-
stored numbers can call intercom & enter code to activate output
1).
1234
03????#
Change monitoring mode password (user can call the intercom,
enter this pass code to listen in and speak)
5555
Dial out numbers
1XY????#
Store dialling out numbers. (X = button number 1-9 & 0 for
button 10) (Y = number dialled 1-4) (???? = phone number)
N/A
1XY*#
Delete a dial out number. (X = button number) (Y = number
position 1-4)
N/A
Volume controls
3?#
Speaker volume. Where ? = 1-9. 1 = lowest, 9 = highest.
5
4?#
Microphone volume. Where ? = 1-9. 1 = lowest, 9 = highest.
5
Timings
50?#
Relay 1 time. ? = seconds, 1-9999
1 sec
51?#
Relay 2 time. ? = seconds, 1-9999.
1 sec
45??#
Calling time for first number, adjust this to avoid voicemail
picking up a call (10-99 secs)
20 secs
46??#
Calling time for second number, adjust this to avoid voicemail
picking up a call (10-99 secs)
20 secs
47??#
Calling time for third number, adjust this to avoid voicemail
picking up a call (10-99 secs)
20 secs
53????#
Talking time. 5-9999 seconds.
60 secs
