40-7705ii-C-IS
Page 7
Rev 1 March 16, 2018
5.2
MultiNet User Manual – Admin GUI
Once you have logged in to the Admin GUI, you can select links to perform a
number of configuration functions. Listed below are sections of the Admin GUI
to check if this is your first time using the Admin GUI.
Server Configuration where you will set some important server parameters
Define your first Business Unit.
o
No user Business was created at the factory. You need at least one.
o
If you cannot select a name at this time “use a name like
“PrimaryBusinessUnit” or the name of an organization or a word
related to the purpose of this Business Unit. You could later delete
it and create one once you become familiar with its purpose.
o
Select Data Type: “Security” with no automation parameters,
especially serial device name and heartbeat signal frequency.
o
Select “Universal ID” You need to know the ID of the IP-Link.
Factory default for the IP-Link is ID 1111
If you did not select Universal ID then add Subscriber ID’s to the Business
Unit. By selecting Universal ID on the first page of creating the Business
Unit, all messages from the IP-Links listed will automatically be
associated with this Business Unit. If you do not select Universal ID then
every Subscriber ID must be entered into each Business Unit’s database
manually. Any messages from an ID not in a database will be sent to the
Business Unit named orphan.
After successfully completing the tasks outlined “MultiNet Receiver System –
User Manual”, you should be ready to power up, configure, as shown in figure 4-
2 or figure 4-3 of 40-7705ii-C-UM and bring your 7170-C IP-Link transceiver(s)
online.
If you are finished using the Admin GUI Web pages then you should:
Close the Konqueror Web Browser and…
Logout the user.
