P a g e
|
13
Testing
Press the call button on the intercom and all coded handsets should ring (max 4 handsets).
Answer the call on any handset by pressing
OK
,
and check for good 2 way speech. Adjust
volume while on a call with up and down arrow buttons on the handset and press the same button
again to end the call. The gate/door release button can be pressed at any time, either while on or
off a call. The relay on the transmitter should then pulse on for 4 seconds.
Using the intercom Handset
OK
12.21
Answer /
end call
Relay 1
Internal call
another handset
Up and down arrows
increase / decrease ring
and speech volume
Change
ring tone
Select or enter
OK
Relay 2
Adjusting Relay time
Press Relay 2 button for 3 seconds,
scroll through menu until you see ‘ti’. Press OK to select ‘ti’
and adjust your relay times. Press OK to select your relay time. Press the right arrow end the
process. Both relays will have the same relay time.
Adjusting time on Handset
Press OK for more than 2 seconds, and then use up and down arrow keys to set hour. Press OK
again to cycle to minutes and adjust. Press OK once more to end the process.
Calling…..
OK
12.21
OK
OK
12.21
OK
OK
12.21
OK
OK
12.21
OK
