9
Do not operate the Aerus® Pure & Clean+ without the Filter Assembly and Back Cover properly installed.
WARNING
REPLACE ACTIVEPURE
®
CELL
The CELL indicator will light up if the ActivePure® Cell is no longer working. To order a new ActivePure Cell, contact your
Independent Distributor/Contractor or Aerus Customer Service at 800.572.0502 (U.S.) or 800.668.0763 (CANADA).
NOTE:
The ActivePure Cell should be replaced every one (1) year, even if the unit does not display this message.
When the CELL indicator starts flashing, you will need to perform the following operations to reset:
• After 1 year of cumulative use, the CELL indicator starts flashing. After the user replaces the new ActivePure Cell according to the
operation steps on page 10 of the manual, long press the RESET button for three seconds under the power off / standby state,
you will hear a beep sound to let you know the reminder has been cleared.
When the CELL indicator starts flashing in red, you will need to perform the following operations to reset:
• The CELL indicator flashes in red to remind the user that ActivePure Cell is not properly installed. After disconnecting the power
supply, reinstall ActivePure Cell and check whether the socket is installed properly. After the installation is successful, there is no
need to press the RESET icon, the red light will automatically turn off. After the above operations, if the indicator remains flashing in
red, ActivePure Cell is possibly damaged. In this case, contact your Independent Distributor/Contractor or Aerus Customer Service
at 800.572.0502 (U.S.) or 800.668.0763 (CANADA).
Resetting the Reminders
The reminders you need to reset are the PERFORM CLEANING and REPLACE ACTIVEPURE CELL indicators (after performing maintenance,
press the Reset icon and the screen will stop flashing to let you know the reminder has been cleared, please see above instructions for each
indicator).
GENERAL MAINTENANCE
Unplug the unit before performing any maintenance procedures.
WARNING
Periodic maintenance is required to ensure that your Aerus Pure & Clean+ operates properly. The unit will display a PERFORM CLEANING
reminder when it's time to perform regular maintenance. If you are operating your unit in a severely polluted environment, cleaning of the
unit, Purifier Plate, ActivePure Cell, and Filter Assembly should be done more frequently. Shown here are basic procedures that should be
carried out to keep your unit running at top performance.
For optimal performance, and to prevent damage not covered by your warranty, install the Optional HEPA Filter. Failure to perform routine
maintenance could adversely affect the proper function of the unit or cause it to fail prematurely.
NOTE:
If a unit is returned for repair, and it is determined that neglect of the unit or unauthorized tampering with any mechanical or
electronic component of the unit caused the failure, Aerus reserves the right to void the product warranty. This will require the owner to pay
for any required repairs.
Cleaning the Case
Wipe the unit with a soft cloth dampened (not wet) with water. Do not use chemicals or solvents. Vacuum the Top and Rear Grills periodically
to remove any lint buildup.
MAINTENANCE REMINDERS (CONTINUED)
• Damage may result from soaking the Purifier Plate longer than 10 minutes
• Damage may result from using a Purifier Plate when not completely dry
CAUTION