3
PRODUCT CONTENTS
Power Wiring Assembly
INSTALLATION STEPS
1.
Clean the mounting area on
the Mini Split with alcohol
to remove any dirt, oils or
grease which may prevent
the mounting tapes from
adhering.
2.
Connect the power leads to
the rear of the Air Scrubber
Mini EM by Aerus unit.
WARNING:
Before you begin installation, verify the Mini Split HVAC system
is turned off and disconnected from the power source. Failure
to disconnect the power may result in severe electrical shock.
CAUTION:
Never look directly at the ActivePure Cell while illuminated. This
cell produces UVC light which is known to cause damage to eyes.
WARNING:
This unit must be installed by a licensed HVAC contractor.
Failure to do so will void warranty of the product.
Your Air Scrubber Mini EM by Aerus carton will contain the following:
• Air Scrubber Mini EM by Aerus unit with 230 Volt Ballast
• Power Leads
• Installation Manual
