ARMOTECH
Rev 02.00
Pag. 20 di 24
©| Aerservice Equipments S.r.l. | 2021 all rights reserved
è vietata la riproduzione del presente manuale, anche parziale.
Description of dangers and specific protections
However, the manufacturer has taken steps to reduce the dangers that may arise due to incorrect use of the
machine by installing protective devices on the machine itself.
Description of hazards that cannot be eliminated from the security measures adopted
The dangers that cannot be eliminated from the safety measures adopted by the manufacturer are caused
by incorrect use of the machine or by a failure by the user to comply with the safety standards described in
this manual.
INSTRUCTIONS FOR EMERGENCY SITUATIONS
In case of fire, use powder fire extinguishers complying with current regulations.
Never use liquid fire extinguishers.
In case of fire, pay attention to the combustion gases (plastic system).
MAINTENANCE
Par
Description
1
Ordinary and extra-ordinary maintenance
CLEANING AND ROUTINE MAINTENANCE
Adequate cleaning is recommended for optimal operation. Regular checks and cleaning of the fan impeller
should be provided.
For normal cleaning operations, commercially available cleaners can be used.
Regular maintenance of the system increases its duration and operating safety, the hood internal joint must
be periodically greased.
EXTRAORDINARY MAINTENANCE, REPLACEMENTS AND REPAIRS
Extraordinary operations are those for the repair and replacement of one or more components of the
the system that normally becomes necessary only after years of good operation, which do not alter the
characteristics of the machine.
The device does not require any particular replacements except in cases where there is a possible filtering of
the fluid downstream of the system.
The parts most subject to wear and which need to be replaced over time can be the flexible hose, the nozzle
and the centrifugal impeller of the fan.
In the event of substantial changes, the manufacturer cannot be held responsible for any dangers that may
arise.
