ARMOTECH
Rev 02.00
Pag. 13 di 24
©| Aerservice Equipments S.r.l. | 2021 all rights reserved
è vietata la riproduzione del presente manuale, anche parziale.
15
–
open the suction hood box and check the
integrity of the hood and the presence of the
protective band called "clamp cover".
16 -
17
–
remove the screw and nut. The red bakelite
washers must remain attached to the joint
structure.
18
–
insert the clamp cover into the hood
19
–
screw the suction hood to the joint using the
screws removed previously, making sure to insert
the belleville washers (dished washers) in the
correct direction.
Make all the adjustments of the joint by screwing
or unscrewing the system.
20
–
use the second hose clamp to fix the flexible
sleeve and finally use the clamp cover to hide
everything.
21
–
move and check correct maneuverability and, if necessary, review the adjustments made previously.
