SPECIFICATION
Rated Voltage
12V
Limited voltage
9~26V
USB output
5V/2.1A & 5V/1.0A
Work temperature
0~50
℃
SNR
>60dB
Degree of distortion
<0
．
1%
Frequency response
20Hz-15Khz
Left and right channel dB
>60dB
Bluetooth version
Version 2.1
Bluetooth feature
A2DP (Advance Audio
Distribution Profile)
Bluetooth Transmit distance
10M
Bluetooth microphone effective range
0.5~2M
FM Transmit frequency
87
．
5~108Mhz
Transmit frequency modulation mode
Stereo digital PLL
frequency lock
WARNING
Do not turn the FM transmitter volume too high to avoid voice
distortion (normally at 28 or below). Please use the volume on your
car audio system if needed.
Select a pre-set channel without signal interference.
Operation mode for Bluetooth may be different due to differences
from various mobile phones.
Some models of mobile phone won’t connect automatically after
powering is off and therefore require pairing again.
The device is compatible with 95% of the mobile phones in the
market, but not all. Please understand this before purchasing this
product.
During a phone call, the volume should be moderate to avoid
affecting the other end of the call.
Do not use the product in dusty, high-humidity or
extreme-temperature conditions.
Prevent the product from falling to avoid damage.
Do not open the product yourself. Please contact the distributor if
you require assistance.
Data in this manual is subject to alteration without prior notice.
This device will auto power off if no Bluetooth device is paired
TROUBLE SHOOTING
Device not powering on or nothing displayed when power is on
Check if contact between the device and cigarette socket is undone,
or if cigarette socket is rusty.
Check if fuse of the device has burned out. If yes, please replace
with same fuse.
Pull out the device from cigarette socket and plug in again.
Playing failure
Check volume is not set at ‘0’
Muting noise but no voice
Check if media player on your phone is on ‘PAUSE’.
Check if volume is on 0 or is low.
Bluetooth hands-free failure
Check if mobile telephone has been connected with the player.
No sound transmitted to car audio
Check if the device is in the transmitting state.
Check if the transmitting frequency is the same with receiving
frequency of the car radio.
Noise with transmission
Check if the pre-set channel has a strong signal; try to change the
FM Frequency to a channel without signal interference.
WHATS IN THE BOX
1.
FMT280 Bluetooth Car FM Transmitter
2.
User Manual
Technical Asisstance
If you need assistance setting up or using your Aerpro product now or in
the future, call Aerpro Support Australia
TEL: 03 – 8587 8898 FAX: 03 – 8587 8866 Mon-Fri 9am – 5pm AEST
Please retain this user guide for future reference.
