Attaching the mount to the holder
1. Place the adjustable collar over the ball of
the mount
2. Press the ball of the mount into the back of
the magnetic wireless charging head
3. Move the magnetic wireless charging head
to the desired position and tighten the
adjustable collar.
Attaching the adhesive mount to a flat
surface
1. Clean any oil, debris, or dust on the area
where 3M base is to be placed. If possible use
an alcohol wipe to help with adhesion.
2. Peel off the protection sheet from the 3M
base and stick to chosen area by strongly
pressing the base for an extended period of
time.
3. The strength of the 3M tape will perform
perfectly after 4-5 hours of installation.
4. Do not use the magnetic holder for the above
period of time or the mount may become
unstuck.
