10
The power supply source needs to guarantee at least 10.5
Volt to max.15.0 Volt DC and enough permanent output to
operate the unit.
NOTE: Connecting the DC power in the wrong way
(reverse polarity) will destroy the power inverter and
may damage the electrical equipment in use, please
follow the steps below in the correct sequence and
make sure to use the inverter in the correct way.
9.1. Connecting to the power supply
1. Unpack the power inverter and ensure that the switch is
at the OFF position.
2. Supplied are one red and one black ring terminal to
alligator clamp cable for the battery.
3. Screw tightly the red ring terminal end cable to the
inverter’s “+” and attach the red alligator clamp/ring
terminal end to the vehicles battery’s “+” terminal.
4. Screw tightly the black ring terminal end cable to the
inverter’s “--” and attach the black alligator clamp/ring
terminal end to the vehicles battery’s “--” terminal.
5. Turn on the inverter switch, green light should come on
6. If green light is on the inverter is ready for the desired
electrical appliance to be plugged into the AC output
socket of the inverter.
Caution: Inverter may only be operated with 12 Volt
batteries. It cannot be operated at 6 Volts and at 24
Volts the inverter will be damaged!
9. POWER SUPPLY
