20
Chapter 1
www.aerotech.com
1.2. Electrical Specifications
Table 1-6:
Electrical Specifications
Description
HPe 10
HPe 20
HPe 30
Motor
Supply
Input Voltage
14-240 VAC
Input Frequency
50-60 Hz
Inrush Current
34 A
Max Continuous
Input Current
5 A
rms
10 A
rms
10 A
rms
Input Current
Refer to
Section 1.2.1. System Power Requirements
Control
Supply
Input Voltage
85-240 VAC
Input Frequency
50-60 Hz
Inrush Current
16 A
Input Current
1 A max
Output Voltage
(1)
20-340 VDC
Peak Output Current (1 second)
10 A
20 A
30 A
Continuous Output Current
5 A
10 A
10 A
Power Amplifier Bandwidth
2500 Hz maximum (software selectable)
Power Amplifier Efficiency
85% - 95%
(2)
PWM Switching Frequency
20 kHz
Minimum Load Inductance
0.1 mH @ 160 VDC (1 mH @ 320 VDC)
User Power Supply Output
5 VDC (@ 500 mA)
Modes of Operation
Brushless; Brush; Stepper
Protective Features
Output short circuit; Peak over current; DC bus over voltage; RMS
over current;Over temperature; Control power supply under voltage;
Power stage bias supply under voltage
Isolation
Optical and transformer isolation between control and power stages.
(1) AC input voltage and load dependent.
(2) Dependent on total output power: efficiency increases with increasing output power.
Soloist HPe 10/20/30
Introduction