ALS130H Hardware Manual
Overview
Chapter 1: Overview
N O T E :
Aerotech continually improves its product offerings; listed options may be superseded at any
time. All drawings and illustrations are for reference only and were complete and accurate as of this
manual’s release. Refer to www.aerotech.com for the most up-to-date information.
Table 1-1:
ALS130H Model Numbering System
ALS130H Mechanical-Bearing Direct-Drive Linear Stage
Travel (Required)
-025
25 mm travel stage with high-accuracy1 Vpp encoder and single 25-pin connector
-050
50 mm travel stage with high-accuracy1 Vpp encoder and single 25-pin connector
-100
100 mm travel stage with high-accuracy1 Vpp encoder and single 25-pin
connector
-150
150 mm travel stage with high-accuracy1 Vpp encoder and single 25-pin
connector
NOTE:
The 25-pin connector is not valid for systems using bus voltages greater than 80 V.
Cable Management (Optional)
-CMS1
External CMS for lower-axis of XY assembly, right-side
-CMS2
External CMS for lower-axis of XY assembly, left-side
NOTE:
CMS option is not avaialble with 25 mm travel stages. Order CMS with lower axis stage only.
Metrology (Required)
-PL1
Metrology, uncalibrated with performance plots
-PL2
Metrology, calibrated (HALAR) with performance plots
www.aerotech.com
Chapter 1
9
