background image

Global Technical Support

Go to

www.aerotech.com/global-technical-support

for information and support about your Aerotech products. The website

provides downloadable resources (such as up-to-date software, product manuals, and Help files), training schedules, and
PC-to-PC remote technical support. You can also complete Product Return (RMA) forms and get information about repairs
and spare or replacement parts. For immediate help, contact a service office or your sales representative. Have your
customer order number available before you call or include it in your email.

United States (World Headquarters)

Phone: +1-412-967-6440

Fax: +1-412-967-6870

Email: [email protected]

101 Zeta Drive

Pittsburgh, PA 15238-2811

www.aerotech.com

United Kingdom

Japan

Phone: +44 (0)1256 855055

Fax: +44 (0)1256 855649

Email: [email protected]

Phone: +81 (0)50 5830 6814

Fax: +81 (0)43 306 3773

Email: [email protected]

Germany

China

Phone: +49 (0)911 967 9370

Fax: +49 (0)911 967 93720

Email: [email protected]

Phone: +86 (21) 5508 6731

Email: [email protected]

France

Taiwan

Phone: +33 2 37 21 87 65

Email: [email protected]

Phone: +886 (0)2 8751 6690

Email: [email protected]

This manual contains proprietary information and may not be reproduced, disclosed, or used in whole or in part without the
express written permission of Aerotech, Inc. Product names mentioned herein are used for identification purposes only and
may be trademarks of their respective companies.

Copyright © 2008-2018, Aerotech, Inc., All rights reserved.

Summary of Contents for ABL1500Z

















































Reviews: