Npaq® Hardware Manual
Installation and Configuration
2.6.6. Brake Output
The Brake Output pins provide a direct connection to the solid state relay on the Npaq. The brake output pins
permit the brake to be wired with other signals in the feedback cable. The brake is configured for automatic or
manual control using controller parameters (refer to the A3200 Help file for more information).
Refer to
for more information on using the brake output with the solid state relay.
Table 2-20:
Brake Output Pins on the Motor Feedback Connector
Pin #
Description
In/Out/Bi
13
Optional Brake - Output
Output
25
Optional Brake + Output
Output
58
Chapter 2
www.aerotech.com
