8
5.
Inflate the spa pool by pressing the “BUBBLE” button on the control panel. When the spa is
properly inflated, press the “BUBBLE” button to shut off the bubble function.
ATTENTION:
Do not over inflate the spa pool.
NOTE:
If you need to add additional air to the spa pool after it has been filled with water, you
must first turn on the bubble function for 2-3 minutes by pressing the “BUBBLE” button. Then
follow instructions in steps 2-5 above accordingly.
6.
Remove the inflation hose from the air valve on the spa wall and replace the valve cap tightly.
7.
Remove the inflation hose from the air outlet and replace the outlet cap tightly.
8a.
Place the filter cartridge cover on the filter cartridge.
8b.
Screw the filter cartridge onto the
water inlet on the spa wall by turning it clockwise.
8a
9.
Using a garden hose, fill the spa with water to the water level fill line printed on the spa wall.
10.
Place the cover onto the spa and fasten the zipper.
WARNING: This cover is not a safety
cover and is not a replacement for adult supervision.
5
8b
