10
14. The next step is to install the inboard and outboard sprogs and secure them in position. Before doing
so, working through the sprog access zippers, preflight the following items:
- internal ribs to confirm that they are fully zipped up;
- the sprog hardware and the sprog cable attachments at both ends of each sprog cable.
To deploy and secure each sprog, swing the sprog away from the leading edge and align it in the center
of the rear end of the sprog access zipper. Fully close the sprog access zipper and this will secure the
sprog in the proper position underneath the transverse batten and capture it in position.
15. Attach plastic winglets. Put the front part of the winglet between the sail and the outer part of the
leading edge tube. Put the winglet tightly inside the sail, fixing it with Velcro. Make sure the winglet is
properly installed and secure it with a bolt, a nut and a safety ring. Note the plastic washers are to be
installed on top and bottom of the sail.
Summary of Contents for COMBAT 12T
Page 2: ...2...
