10
Figure 14
Figure 15
15. Install the lever battens as shown on the figures 16 and 17.
Figure 16
Figure 17
16. The next step is to install the outboard sprogs. To do so swing the sprog away from the leading edge
and push it towards the leading edge in to the receptacle (fig. 18). Make sure the sprog sits all the way in
the sprog receptacle.
Figure 18
Figure 19
17. Remove the keel tube extension, supporting the wing under the keel tube and lower the wing on its
nose.
18. Install the hang bracket (fig. 19, shown for Fox-13T).
Place a plastic cube on the keel tube between
the two stop rings. Then mount the U-plate, fit the two bolts, tighten the nuts and secure with the safety
rings.
