1
1
1
13
14
Now glue the three remaining deck beams (1) in the notches in the hull.
At this stage the whole of the hull and deck should be given two coats of sanding sealer.
Install the motor in the hull, and cover it to protect it from soiling.
The deck can now be attached to the hull: apply plenty of glue to all the joint surfaces of the hull and deck beams,
and place the deck in position. Fix the parts together temporarily using strips of adhesive tape. Turn the hull over
and leave it inverted until the glue has set hard; you will need to use packing pieces to provide clearance for the
bollards.
When the glue is dry, give the outside of the hull two or three coats of sanding sealer, rubbing down between coats.
