2-20. Install the fuel rail that has an AN-08 port plug in one of the ends and the center of the bottom on the driver side,
with the port plug facing the front of the vehicle. This kit comes with 2 aluminum spacers which get installed
between the lower intake manifold and the fuel rail brackets. After insuring that the injectors are properly seated in
the intake manifold injector bores, install the driver side fuel rail mounting bolts, insuring that the fuel rail spacers
are captured between the fuel rail bracket and the lower intake manifold. In some instances you will need to shim
the fuel rail out further to gain clearance between it and the distributor, this can be accomplished by using ¼” flat
washers.
2-21. Install the passenger side fuel rail, being careful not to cut any of the o-rings during installation (This fuel rail does
not require any spacers between the fuel rail bracket and the lower intake).
