0019-0015 Installation Instructions SunSpot 36-4313_4314 Rev IR Page 3 of 9
Installation Guide:
Sunspot 36 4313 and 4314
P/N
01-1030-4313
or P/N
01-1030-4314
LED Landing or Taxi light
Sunspot 36 4313-H and 4314-H
P/N
01-1030-4313-H
or P/N
01-1030-4314-H
LED Landing or Taxi light with
built-in pulse recognition mode
Operational Voltage: 14 Volt DC
Input Current:
6.5 Amps Peak
Limitations and Installations
Equipment Limitations:
Mount in approved PAR36 bulb holder with circuit breaker or fuse appropriate for rated current. For
retrofit installation existing circuit breaker or fuse can typically be used. The procedures contained
herein are not intended to conflict with the procedures set forth by aircraft and engine manufacturers,
nor do they supersede the FAA approved manuals and FAA regulations. Consult
14CFR, §43.13-1B
for
guidance on acceptable methods, techniques, and practices.
