4
STEP 2. Tail & Wing Mounting
¤ Center wing on fuselage by aligning the arrows on
the wing with the fuselage seam
¤ Secure wing in place by attaching 4 rubber bands to
the wing hold-down rods. First attach two crossing to
form an “X”, than one on each side.
If your plane already has the tail mounted, proceed-
directly to the wing mounting below.
¤ Insert the Vertical Fin mounting studs through the
holes in the Horizontal Fin and then through the
holes in the fuselage tail and secure with thumb-nuts.
When the landing gear is used, add the tail wheel
before securing the thumb-nuts.
¤ Hold off on connecting the pushrod clevis connectors
to the tail until ready for the Tail Control Test (Step 4)
and follow the linkage setting and adjustments.
