This icon indicates a general caution. Failure to comply with a caution notification can result in damage to equipment.
This icon indicates an electrical caution. Failure to comply with an electrical notification can result in serious injury or
death, and extensive damage to equipment.
This icon indicates a laser caution. Failure to comply with a laser caution can result in serious injury.
The following table lists the safety precautions you should follow when installing your AP630 devices.
Aerohive devices must be installed by a professional installer who is certified to install these types of devices and to
ensure that they are properly grounded and meet applicable local and national electrical codes.
These devices are intended for indoor use only.
Do not install the device in an environment where the operating ambient temperature might exceed the recom-
mended ranges.
For products available in the USA/Canada market, for the 2.4 GHz band, only channels 1-11 can be operated. Selec-
tion of other channels is not possible.
Changes or modifications made to this device that are not expressly approved by the party responsible for com-
pliance could void the user's authority to operate the equipment.
Use only attachments and accessories specified by Aerohive.
These devices are not intended for use by persons (including children) with reduced physical, sensory, or mental cap-
abilities, or with lack of experience of knowledge unless they are given supervision or instruction concerning use of the
devices by a person who is responsible for their safety. Children should be supervised to ensure that they do not play
with the devices.
Electrostatic discharge (ESD) can damage equipment and impair electrical circuitry. ESD damage occurs when elec-
tronic components are improperly handled and can result in complete or intermittent failures. Be sure to follow ESD-pre-
vention procedures when handling electronic components and equipment.
During operation, the surfaces of the AP630 can become hot. Use caution when handling.
To meet federal radiation exposure requirements, these devices should be installed at a minimum distance of 11" (28
cm) from people or animals.
Install the AP
The following sections describe how to mount your AP on a dropped ceiling track or to a wall.
Shipping Carton Contents
The AP630 access point shipping carton contains the following items:
l
AP630 chassis
l
AP630 mounting bracket
l
Read Me card
You can mount the AP630 on a flat surface or wall, or on the rails of a standard dropped ceiling grid. . There is also an accessory mounting bracket
that allows you to install the device in Armstrong-style dropped ceilings.
The following sections describe how to install your AP630 devices and connect them to the network.
AP630 Hardware User Guide
Page 2
